Mold and the Importance of Post-Mold Remediation Small Particle Cleaning

Introduction

It happened again... Another ERMI test (mold testing for the home) came back toxic AFTER they have remediated. The patient is distraught, the family is still suffering, what's going on?!

When it comes to mold remediation, it's essential to ensure that the process is thorough and effective. Unfortunately, not all remediation efforts are created equal, and sometimes mold spores and toxins can be left behind, causing potential health hazards. In my experience, this happens at least half of the time. In cases where proper containment and negative air pressure were not maintained during the remediation process, the risk of cross-contamination is even higher. This is why proper steps and post-remediation small particle cleaning is crucial to ensure a safe and healthy living environment.

The Problem of Cross-Contamination

Imagine a scenario where mold remediation was carried out in a home without adequate containment measures. Perhaps contractors dragged contaminated materials, such as carpets, through the house during the removal process. In such cases, mold spores and toxins can be easily spread throughout the home, leading to cross-contamination. This is not only a concern for those with mold allergies or sensitivities but a potential health risk for anyone living in the affected space.

The Process of Small Particle Cleaning

To address the issue of cross-contamination effectively, a meticulous small particle cleaning process is necessary. Here is a step-by-step guide to what this process entails:

• Ozone Treatment: Ozone is used to help neutralize and eliminate mold spores and toxins in the air and on surfaces. It's a powerful tool in the fight against mold contamination.

• HEPA Vacuum Everything: The use of a HEPA vacuum is crucial in capturing tiny mold particles and preventing them from becoming airborne again. Every surface and corner of the affected area should be thoroughly vacuumed.

• Fogging: Fogging involves the dispersion of anti-fungal and anti-microbial agents in fine droplets throughout the space. This helps to kill any remaining mold spores and inhibit future growth. We use the EC3 Fogger (this is NOT in place of proper remediation).

• HEPA Vacuum Again: After fogging, another round of HEPA vacuuming is essential to remove any particles or residue that may have settled during the process.

• Wipe Down with Anti-Fungals: Surfaces should be wiped down with anti-fungal solutions to ensure that any remaining mold spores are killed and that the area is left mold-free. EC3 mold spray, vinegar, or borax solution are good options here.

Handling Contaminated Belongings

It's not just the building itself that may be affected by cross-contamination. Belongings, such as furniture, toys, books, and clothing, can also harbor mold spores and toxins. Here's how to address this issue:

• Furniture: Upholstered furniture is a common source of cross-contamination. In many cases, it's best to remove contaminated furniture from the premises. Before deciding to keep furniture, you can perform a tap test using EC3 plates to determine if it's still viable or if it needs thorough cleaning or disposal.

• Books/Paper: Typically needs to be removed or contained in sealed plastic bags. Store them away from home.

• Clothes: Clothing exposed to mold contamination should be washed using a solution of EC3 and borax to ensure thorough cleaning and mold removal.

Test and re-test as needed to ensure a healthy environment using ERMI tests and EC3 mold plates.

Conclusion

Post-remediation small particle cleaning is a critical step in ensuring that your living space is safe and free from the harmful effects of mold contamination. In cases where mold remediation may not have been carried out with the utmost care, the risk of cross-contamination is a real concern. By following a comprehensive cleaning process and addressing contaminated belongings, you can restore your home to a mold-free and healthy environment for you and your family. Remember, when it comes to mold, thoroughness is key to success.

Dr. Martin Hart DC, NASM-CES, TFT/EFT

Keystone Total Health

Disclaimer:

The content provided in this blog post is for educational purposes only and should not be considered as medical advice. The information presented here is intended to inform and educate readers about a specific topic, but it is not a substitute for professional medical guidance, diagnosis, or treatment.

It is essential to consult with a qualified healthcare provider or medical professional before making any decisions related to your health, including but not limited to, changes in diet, exercise, medications, or treatment plans. Every individual's health and medical circumstances are unique, and what may be suitable for one person may not be appropriate for another.

The content provided here is based on research and general knowledge available up to the date of publication. Medical information is continually evolving, and new findings or recommendations may supersede the information provided in this post.

We make no warranties or representations regarding the accuracy, completeness, or suitability of the information presented. Any reliance you place on the information from this blog post is at your own risk. We disclaim any liability for any adverse outcomes or consequences resulting from the use of the information provided in this blog post.

Always seek the advice of a qualified healthcare provider or medical professional for any medical concerns or questions you may have. Your health is a matter of utmost importance, and decisions about it should be made with the guidance of a trusted healthcare expert.